Duct Work in Delano, CA

Duct Work in Delano, Bakersfield, Tulare, McFarland, Earlimart, Richgrove, Pixley, CA, and the Surrounding Areas

MRV Service Air Inc. is proud to be providing duct work services to our customers in Delano, Bakersfield, Tulare, McFarland, Earlimart, Richgrove, Pixley, California, and the surrounding areas. All of our technicians are trained and certified so you can rest assured that you are putting your ducting project in the right hands. Contact Us Today for Duct Work in Delano, Bakersfield, Tulare, McFarland, Earlimart, Richgrove, Pixley, CA, and the Surrounding Areas.

Rooftop exposed ductwork in Delano, CA

The purpose of the duct work is to transport air from the central air handling unit throughout a building. Air will enter through an intake and then travel down the main trunk line before it branches out into smaller runs that lead to specific rooms.

It’s important to maintain the duct work in your HVAC system because it aids in energy efficiency by preventing leaks which can cause your system to have to work harder than necessary.

Maintaining your duct work by topping off insulation levels and sealing out drafts from entering, for example, will keep leaks from happening. With the cost to heat or cool a home in such a large part based on the amount of air moved, leaks in duct work can cost you quite a bit when trying to heat or cool your home.

The average time for duct cleaning is about three hours, but some projects may require more extensive work on your heating and cooling system than others. The type of equipment used by the contractor you hire will also determine how long the job takes.

For duct work services in Delano, Bakersfield, Tulare, McFarland, Earlimart, Richgrove, Pixley, CA, and the surrounding areas, contact MRV Service Air Inc. today!

Duct Work Repairs

Duct Work in Delano, Bakersfield, Tulare, McFarland, Earlimart, Richgrove, Pixley, CA, and the Surrounding Areas

Duct work that is damaged or deteriorated can be repaired. Repairs are usually done by repairing or replacing the affected areas of the duct and then resealing the entire system.

Sagging in duct work is a common problem, leading to excessive noise during use. If you have gaps in the corners of your rooms, it means that you have insulation coming in from one or both ends. If this isn’t fixed, this will cause energy loss in the home and could contribute to moisture issues within the walls.

Replacing diffusers is another common duct work repair. This requires pulling each individual register off of the wall to get at the diffuser behind it. If this isn’t done correctly, it could lead to gaps in the integrity of your heating and cooling system.

MRV Service Air Inc. can help with duct work services in Delano, Bakersfield, Tulare, McFarland, Earlimart, Richgrove, Pixley, CA, and the surrounding areas.

Duct Work Replacement

HVAC systems are designed to last 15-20 years on average, but the duct work itself is only expected to last 8-12 years. If your system was installed before 1993 or you have galvanized steel ducts, you will likely need to replace the ducts at some point.

Most manufactured ducts are made from galvanized sheet metal, fiberglass, or smooth-surfaced, flexible aluminum. Galvanized steel is far and away the most common material, but it is also one of the least efficient to work with. It’s not as durable as fiberglass or aluminum and has a higher rate of leakage, requiring more comprehensive duct sealing and insulation procedures over time.

MRV Service Air Inc. can provide duct work replacement to homeowners in Delano, Bakersfield, Tulare, McFarland, Earlimart, Richgrove, Pixley, CA, and the surrounding areas when required. Call us today!

Other Services Includes:

Let’s get started on your ducting project. Call MRV Service Air Inc. or fill out our online form and one of our specialists will get back to you right away.  We appreciate the opportunity to earn a 5-star review!